Post Offer Free
Jiangsu Sunpower Co., Ltd.
Jiangsu Sunpower Co., Ltd.  

Gold Index: 1812

You are here: home  > 18650 cylindrical power lithium-ion batteries  > INR18650-2500mAh Li-ion Rechargeable cylindrical battery

INR18650-2500mAh Li-ion Rechargeable cylindrical battery 

Payment Terms: T/T,L/C 
Place of Origin: Jiangsu, China (Mainland) 
inquire
Add to My Favorites
HiSupplier Escrow
Share |

Product Detail

Production Capacity: 12MILLION PIECES PER MONTH
Delivery Date: 30-45DAYS
Packing: CARTON BOX
Brand Name: Sunpower

INR18650-2500mAh Li-ion Rechargeable cylindrical battery,High security lithium ion battery,rechargeable lithium battery

INR18650-2500mAh Li-ion Rechargeable cylindrical battery,High security lithium ion battery,rechargeable lithium battery,High temperature resistance lithium ion battery

 

Environment Adaptation Performance  of  lithium ion battery

 

NO. 

Item

Standard

Test Method

1

Altitude/Low pressure simulation test

no leakage, no fire, no explosion

The full charged cells are to be stored for 6h at an vaccum environment with pressure of less than 11.6kPa and atemperature of 23℃±3℃.

2

Free drop test

no fire, no explosion

The fully charged battery drops on the concrete ground from height(1m),total 3 times,to obtain the shock of random directions.

3

Vibration test

No remarkable damage,No smoking  ,No explosion

After standard charging, fixed the cell to vibration table and subjected to vibration cycling that the frequency is to be varied at the rate of 1Hz per minute between 10Hz and 55Hz,the excursion of the vibration is 1.52mm. The cell shall be vibrated for 90 minutes per axis of x, y axes.

 

Storage Temperature for Shipping

If the cell is kept as ex-factory status (50% of charge), the 0.2C recoverable capacity rate is more than 80%.

1 month-20°C ~ 60 °C

2 months-20°C ~ 40 °C

3 months   -20℃~ 25 °C

 

 

Package 

 

The cells are packed with JIANGSU SUNPOWER CO.,LTD. standard carton box, which hold four inner boxes. There are 100pcs 18650 cells per inner box. And the inner box and outer box identifies battery capacity, voltage and impedance information.

 

Warnings and Cautions in Using the power tool lithium ion battery supplier  

 

To prevent a possibility of the battery from leaking, heating or explosion please observe the following precautions:

● When using a new battery for the first time or after long term storage, please use the battery charger specifically for that purpose fully charge the battery before use. 

● Do not disassemble or open, crush, bend or deform, puncture, or shred;

● Do not modify or remanufacture, attempt to insert foreign objects into the battery, immerse or expose to water or other liquids such as water, seawater, drinks such as soft drinks, juices, coffee or others, or expose to fire, explosion, or other hazard.

● Do not short circuit a battery or allow metallic or conductive objects to contact the battery terminals. 

● Avoid dropping the phone or battery. If the phone or battery is dropped, especially on a hard surface, and the user suspects damage, take it to a service center for inspection.

● The battery replacement shall be done only by either cells supplier or device supplier and never be done by the user. 

● Replace the battery only with another battery that has been qualified with the system per standard. Use of an unqualified battery may present a risk of fire, explosion, leakage, or other hazard. 

● Don't keep a battery at rest for a long time (over 6 months). Safety accident may happen when recharging battery which has a rest for a long time.

● In the event of a battery leak, do not allow the liquid to come in contact with the skin or eyes. If contact has been made, wash the affected area with large amounts of water and seek medical advice. 

● Battery usage by children should be supervised. Seek medical advice immediately if a battery has been swallowed

● Never disassemble cells. The disassembling may generate internal short circuit in the cell, which may cause firing or other problems. 

● Never incinerate nor dispose the cells in fire. These may cause firing of the cells, which is very dangerous and is prohibited.

● Do not remove the outer sleeve from a battery pack nor cut into its housing. 

● Do not mix our batteries with other battery brands or batteries of a different chemistry such as alkaline and zinc carbon. 

● Do not mix new batteries in use with semi-used batteries, over-discharge may occur. 

● Promptly dispose of used batteries in accordance with local regulations.

 

Ship

 

The cells might be damaged during shipping by shock. If any abnormal features of the cells are found such as deformation of the cell package, smelling of an electrolyte, an electrolyte leakage and others, the cells shall never be used any more. The Cells with a smell of the electrolyte or a leakage shall be placed away from fire to avoid firing.

 

Storage  

The cell shall be stored at the environmental condition of -20℃ - 45℃ and 65%±20% RH. The voltage for long time storage shall be 3.6V-3.9V range. If the cell has to be storied for a long time (Over 3 months), the environmental condition should be: Temperature: 23℃±3℃ Humidity: 65%±20%RH; please activate the battery once every 3 months according to the following method: Charge with current 0.2C5A until the voltage achieve to 4.0V.

 

The company founded in 2014, focus on producing cylindrical power lithium-ion batteries. The company supply Electric vehicle cylindrical lithium battery, which include 1500mAh, 1300mAh, 2000mAh, 2200mAh, 2500mAh, 2600mAh Li-ion battery and 3000mAh Li-ion battery. All adopt the most advanced extrusion coating production technology and yearly production reaches to 250 million Ah power type 18650 High security lithium ion battery. Our products have high quality  and competitive prices.


Ms. Yuanyuan Zhang
 Ms. Yuanyuan Zhang

Tel: 86-512-58566663
Fax: 86-0512-58566663
Mobile: 139 1571 3028
Contact to this supplier

Related Search

Find more related products in following catalogs on Hisupplier.com

Company Info

Jiangsu Sunpower Co., Ltd. [China (Mainland)]


Business Type:Manufacturer
City: Taizhou
Province/State: Jiangsu
Country/Region: China (Mainland)

You May Like: